last update May 05, 2021
[Solved] Windows 10 critical process died no safe mode

Windows 10 Critical Process Died no Safe Mode

In Windows 10, the critical process died error is displayed with a blue screen with an incidental obscure error message “Your computer ran into a problem and needs to restart. These messages are displayed when a fatal system error occurs, with the main purpose being to address the user about the cause of the error so they can figure out potential fixes for critical process died windows 10 fresh install. The critical process died error indicates that a program integral to the operating of the software died to some issue or error.

How do I fix Windows 10 critical process died?

How to use the SFC tool to repair system files:

  1. Open the Start menu.
  2. Type “cmd.”
  3. Right-click on the first result (Command Prompt) and select Run as administrator.
  4. Type “sfc /scannow” and hit enter.
  5. Wait for the process to finish and restart your computer

What are the causes behind the “CRITICAL_PROCESS_DIED” error?

The essential method died error happens once unauthorized access to information in hand by an essential element is created throughout boot up. Once Windows detects such a modification, then it now kills the method that was changed leading to the Critical Process Died BSOD. There are several reasons behind this error; a number of them are given below:

  • Antiquated software and faulty drivers.
  • Corrupt and broken files.
  • Issues associated with code like memory house is full, out-dated drivers, virus attacks, and etc.
  • Hardware issues such as RAM, CPU, hard drive, etc.
  • Operating system problems.

Effective ways to fix the Critical Process Died error in Windows 10:

If you are in an exceeding boot loop and your computer can’t appear to induce out of the Blue Screen of Death, then the primary step is beside your computer in Safe Mode. In Safe Mode, Windows solely starts with a restricted set of files, programs, and drivers. Start-up programs don’t run and solely basic drivers required running windows are put in. Let’s have a glimpse on the below-mentioned ways in which.

  1. Restart your computer in safe mode: Before moving to any higher complicated solutions, you ought to try and restart your system and check if the problem is mounted or not.
  2. Use the Windows Memory Diagnostic Tool: As this error is expounded to the system memory, you ought to attempt the inbuilt Windows Memory Diagnostic Tool. This can run a second check of your system memory for any noticeable errors, with the potential to run a boot-level check promptly or set back the check until consecutive time you restart your system.
  3. Test your Drivers and Windows Update: The user should update their system drivers, and check for any obtainable Windows system updates to put in necessary bug fixes and device optimizations.
  4. Check the Corrupted System Files: If your system is already up so far, then check if the corrupt system files are conflicting problems with memory management on your system. You will be able to fleetly check your system for corrupted system files writing the SFC command, on an overhead command line or PowerShell terminal.
  5. Replace or use other Hardware components: Typically, the BSOD error is caused by faulty hardware, and so no code fix or Windows reinstallation will rectify it. If you have found the matter in your RAM throughout testing, for example, you have got one possibility that's to interchange it. If you are still obtaining a BSOD error once attempting all the fixes, you wish to interchange different parts as well as your hard drive.

Rebooting into Safe Mode and clean booting could be a necessary step to troubleshooting your computer. If you continue to want additional facilitation on the windows 10 critical process died no safe mode, then you will be able to reach the client support team to get reliable and effective solutions within a brief interval of your time.

Can't boot into Safe Mode critical process died?

Critical Process Died means when a critical system process dies while displaying its bug check error code 0x000000EF or a blue screen error. If you want to fix the Critical process died code issue, you need to follow the below-mentioned steps.

  1. Restart the device in safe mode: This error makes your computer or device unusable and you always get this error when you restart the computer. In this case, you are advised to restart the computer in safe mode.
  2. Update all the drivers: Sometimes, due to incompatible drivers, this error comes in the device. So make sure you upgrade all your drivers by right-clicking a driver and choosing the Upgrade driver software.
  3. Use SFC command: This error occurs due to corrupted or missing files. In this case, you must apply the SFC command to test the file system.
  4. Do a clean boot: If you experience a Critical process died error in windows 10, then you can perform a clean boot in safe mode.
  5. Uninstall the latest software: The user should remove all the latest software with viruses on your computer. Possibly, the virus attack also leads to this error, so it is advised to uninstall the latest software.

For further help regarding Windows 10 critical process died no safe mode, you can contact the customer support.

How do I force Windows 10 into safe mode?

It is important to use the system in safe mode and this is the handiest way to diagnose general issues like unwanted malware, an App that poses a threat to security. Though there are numerous ways to enter the safe mode in Windows 10 whether you are trying to boot up or restarting it.

Some basic steps to force Windows 10 into safe mode.

From the Windows:

  • First, you are required to press the Windows Logo key +I to open the settings.
  • Choose “start button”.
  • Choose settings.
  • Now choose Update & Security and move to the option of Recovery. 
  • Under the option of Advanced Startup, choose the Restart Now button.
  • Once your  PC restarts to the Choose an Option screen, select the Troubleshoot and then the  Advanced Options
  • Now move to the Startup Settings > Restart. 
  • Now your PC restart, a list of options will appear. Now must select 4 or F4 to start your PC into the Safe Mode. If you want to use the Internet, select 5 or F5 for Safe Mode with Networking.

Thus, above all the points on critical process died windows 10, if required you can call directly on their support number to get the answer or feedback.

Post Comments ::

Copyright © 2018 | All Rights Reserved

  • Free Diagnosis

    Troubleshooting Errors

    Available 24*7

    Any device, any problem, anytime, anywhere

    For Resolution Call Now

    +1(802) 267-7774